Formwork variations and innovation

One of the most important parts of constructing a building is its structural integrity. Maintaining a building’s structural integrity involves securing the concrete foundations that support it. These foundations are usually constructed by using concrete formwork systems that are more than capable in handling the pressure of the fresh concrete being poured into it.

These concrete formworks are not only used for building the columns though, they are also widely used all throughout the construction of the building itself, from walls to ceilings and other parts of the building. Today, there is a growing demand for construction companies that offer these services. If you’re one of those that is looking for such, why don’t you try to view the link for details to find out more.

bt innovation

The basics

Formworks are basically moulds for your cement mixture which you then pour in the formwork. They are the ones that hold the cement in place as it dries for it to retain the desired shape. They must be properly sealed and braced for the cement and grout not to leak out the openings. They must also be tightly sealed and braced for them to withstand the pressure of the wet cement inside.

Different formwork variations

Cement formwork can be made out of different types of materials such as plywood, timber, steel, pre-cast concrete or fiberglass which can be combined or used individually. Steel formworks are typically used in situations where reusing a large amount of these formworks are essential. For smallerprojects, timber formworksare just about adequate. Fiberglass formworks made of pre-cast concrete and aluminium are usually used in cast-in-site constructions such as slabs or structuresthat have curved surfaces.

Innovations and solutions

Innovation in concrete design especially curved cement structures sometimes presents itself as a problem to construction companies, which is why BT-Innovation has a solution for this.Regular and conventional formwork systems for this task are very demanding in terms of labor, expensive and well… not very flexible. Large and heavy wooden planks require time and patience and have a damaging effect on the process. Also, made-to-order special formwork can be quite expensive.

The Syflex formwork system they have made means there is a solution to the problem at hand, curved cement structures. It is only 1/3 of the weight compared to traditional wooden formwork, and can be assembled without the use oflifting devices in a short span of time. The new system allows the formation of straight lines as well ascorners and curves with minimal effort needed and can also be reused a lot of times.

There are usually hitches in construction, this is typically unavoidable. What you can do is look for a construction company (the one linked above) that can offer different kinds of solutions to different possible problems that may arise during construction period.